Duke-UNC Brain Imaging and Analysis Center
BIAC Forums | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password   Forgot your Password?
 All Forums
 Support Forums
 Experimental Control
 EyeTracker Not Working?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

garrett.rosania
BIAC Alum

10 Posts
Posted - Apr 12 2004 :  1:07:19 PM  Show Profile  Reply with Quote
The past two times I have been scanning at the 4T the video window for the eyetracker has displayed the following message rather than the appropriate video.

UNABLE TO CAPTURE VIDEO
PROBABLY NO CAMERA
Check camera cable & power,
then do menu: Video > Reset Video

Hopefully someone can come to a solution for me, because the menu tactic yields no change and I am not comfortable manipulating any cables associated with the goggles.

Thanks,

Garrett R.

tozer
BIAC Alum

USA
5 Posts
Posted - Apr 13 2004 :  2:47:56 PM  Show Profile  Reply with Quote
the solution should be simple. there is an eye tracker power switch on the goggles power box. it is located above the "mode" button and needs to be in the down position for the eye tracker to work. if it is off, the eye tracker will display the message you posted. it is not a very sturdy switch, so it may get accidentally moved from time to time. make sure you ask whoever is in the 4T to check the switch if the problem arises again. hope this helps
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
BIAC Forums © 2000-2010 Brain Imaging and Analysis Center Go To Top Of Page
This page was generated in 0.38 seconds. Snitz Forums 2000