Duke-UNC Brain Imaging and Analysis Center
BIAC Forums | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password   Forgot your Password?
 All Forums
 Support Forums
 Experimental Control
 4T scanner can trigger Presentation		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

jim.voyvodic
BIAC Faculty

138 Posts
Posted - May 09 2003 :  2:23:03 PM  Show Profile  Reply with Quote
The parallel port can be used to trigger Presentation to begin on the Win98 system at the 4T scanner. I have tested the connection using Presentation's test function on a phantom. On the hardware page I selected "Use interrupts" from the parallel port (LPT1) in fMRI mode. Could somebody please test it using a real Presentation stimulus paradigm to make sure it works properly. I will add similar cables on the 1.5T computers next week if this works.

thanks,
Jim
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
BIAC Forums © 2000-2010 Brain Imaging and Analysis Center Go To Top Of Page
This page was generated in 0.45 seconds. Snitz Forums 2000