Duke-UNC Brain Imaging and Analysis Center
BIAC Forums | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 Support Forums
 Experimental Control
 can't log on to tracking computer at mock scanner

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

 
Check here to subscribe to this topic.
   

T O P I C    R E V I E W
pooja.gaur Posted - Feb 11 2009 : 3:57:42 PM
Hi,

I am trying to log on to the Tracking computer at the mock scanner, but receive the following error message:

Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, or that your network is functioning correctly. If this problem persists, contact your network administrator.

I have not had any problems logging into the Stimuli computer also at the mock scanner. Does anyone have any advice?

Thanks,
Pooja
5   L A T E S T    R E P L I E S    (Newest First)
petty Posted - Sep 16 2009 : 1:55:36 PM
there was only 1 open ethernet port available yesterday, so we only connected the stimuli computer
pooja.gaur Posted - Sep 16 2009 : 1:54:04 PM
Hello,

I'm unable to log on to the tracking computer at the mock scanner. The ethernet cable was not plugged into the wall, so I've tried plugging it in to each of the available ports, but I am getting the following error:
The system cannot log you on now because the domain BIAC is not available.

Thanks.
Pooja
gunes Posted - Apr 12 2009 : 9:38:50 PM
Hi!

I had the same problem last Thursday. I sent an email to Francis before my subject came and he fixed it. Tell him that you had the same problem with Mesmer (I think, that computer is named Mesmer).

I hope that it will be fixed for you as well.

Gunes
pooja.gaur Posted - Apr 10 2009 : 4:36:27 PM
Hi again,

I didn't have a chance to try that out the other day, but I am encountering the same error now. The cables appear to be connected, and I've tried restarting the computer, but the problem is still persisting. Any other suggestions?

Thanks so much,
Pooja
mullette-gillman Posted - Feb 11 2009 : 4:01:15 PM
Hi Pooja,

I had a similiar message once when there were network issues. I would make sure the network cable is plugged into the back of the computer, and try restarting it if that doesn't help.

-O'Dhaniel

BIAC Forums © 2000-2010 Brain Imaging and Analysis Center Go To Top Of Page
This page was generated in 0.37 seconds. Snitz Forums 2000