Duke-UNC Brain Imaging and Analysis Center
BIAC Forums | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password   Forgot your Password?
 All Forums
 Support Forums
 Experimental Control
 can't log on to tracking computer at mock scanner		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

pooja.gaur
New Member

11 Posts
Posted - Feb 11 2009 :  3:57:42 PM  Show Profile  Reply with Quote
Hi,

I am trying to log on to the Tracking computer at the mock scanner, but receive the following error message:

Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, or that your network is functioning correctly. If this problem persists, contact your network administrator.

I have not had any problems logging into the Stimuli computer also at the mock scanner. Does anyone have any advice?

Thanks,
Pooja

mullette-gillman
Junior Member

USA
40 Posts
Posted - Feb 11 2009 :  4:01:15 PM  Show Profile  Reply with Quote
Hi Pooja,

I had a similiar message once when there were network issues. I would make sure the network cable is plugged into the back of the computer, and try restarting it if that doesn't help.

-O'Dhaniel
Go to Top of Page

pooja.gaur
New Member

11 Posts
Posted - Apr 10 2009 :  4:36:27 PM  Show Profile  Reply with Quote
Hi again,

I didn't have a chance to try that out the other day, but I am encountering the same error now. The cables appear to be connected, and I've tried restarting the computer, but the problem is still persisting. Any other suggestions?

Thanks so much,
Pooja
Go to Top of Page

gunes
BIAC Alum

45 Posts
Posted - Apr 12 2009 :  9:38:50 PM  Show Profile  Reply with Quote
Hi!

I had the same problem last Thursday. I sent an email to Francis before my subject came and he fixed it. Tell him that you had the same problem with Mesmer (I think, that computer is named Mesmer).

I hope that it will be fixed for you as well.

Gunes
Go to Top of Page

pooja.gaur
New Member

11 Posts
Posted - Sep 16 2009 :  1:54:04 PM  Show Profile  Reply with Quote
Hello,

I'm unable to log on to the tracking computer at the mock scanner. The ethernet cable was not plugged into the wall, so I've tried plugging it in to each of the available ports, but I am getting the following error:
The system cannot log you on now because the domain BIAC is not available.

Thanks.
Pooja
Go to Top of Page

petty
BIAC Staff

USA
453 Posts
Posted - Sep 16 2009 :  1:55:36 PM  Show Profile  Reply with Quote
there was only 1 open ethernet port available yesterday, so we only connected the stimuli computer
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
BIAC Forums © 2000-2010 Brain Imaging and Analysis Center Go To Top Of Page
This page was generated in 0.41 seconds. Snitz Forums 2000