Duke-UNC Brain Imaging and Analysis Center
BIAC Forums | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password   Forgot your Password?
 All Forums
 Support Forums
 Scanner Support
 Video Switcher		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

lilykw
New Member

USA
19 Posts
Posted - May 26 2006 :  11:02:24 AM  Show Profile  Reply with Quote
Hi all,
I was at the 3T and tried to use the video switcher and foolishly switched something wrong so the computer I was working on, the left computer, went black. I then pressed ctrl+~ and a menu came up, at which point I told it I wanted to exit. The computer crashed and the screen went completely black, ctrl+~ didn't work...We tried turning the computer off and back on, but that didn't fix the problem. The keyboard was also being weird, as the lights didn't respond to either shut down or capslock or anything. Any help?
Also, the video switcher software on the right computer wouldn't bring up the little matrix with the computer icons to unswitch like I've done in the past.
Thanks,
Lily

deshmukh
BIAC Alum

40 Posts
Posted - May 26 2006 :  11:23:50 AM  Show Profile  Reply with Quote
Lily

The video switch had to be reset. That fixed the problem.

Imran
Go to Top of Page

diaz
BIAC Alum

USA
212 Posts
Posted - May 26 2006 :  11:29:38 AM  Show Profile  Reply with Quote
If resetting the video switch is something that users can do, Can you post instructions here on how to do this in the event that this happens again?
Michele T. Diaz, Ph.D.
Associate Director
Brain Imaging and Analysis Center
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
BIAC Forums © 2000-2010 Brain Imaging and Analysis Center Go To Top Of Page
This page was generated in 0.49 seconds. Snitz Forums 2000