| T O P I C R E V I E W |
| vvs4 |
Posted - Oct 13 2010 : 05:56:25 AM
Hi Everyone!
I have a pretty simple question. We are looking to share one of our e-prime tasks with a collaborator, a task that is using the Neuroscan box on BIAC5. However, this group is already using an 8 button box, and isn't too excited about potentially needing to use two boxes. My question is as follows:
The collaborator has reported that Matlab is not able to read the Neuroscan box, so is e-prime 2.0 able to read the 8 button box? The input types for devices allowed are as follows:
Keyboard
SR Box
Joystick
Parallel Port
Display
Port
Mouse
Serial
Socket (not to be confused with Sochat :P)
Sound Capture
Sound
I am hopeful with this many options, it could be possible! In the case that we can use a different box, where I might I find how this box gets coded into e-prime, so I can edit the task accordingly?
Best,
Vanessa |
| 3 L A T E S T R E P L I E S (Newest First) |
| petty |
Posted - Oct 13 2010 : 3:29:44 PM
good.
not sure if its relevant, but the 8-button box will ouput responses mapping to (1,2,3,4 ... 6,7,8,9), so look out for any differences between the old button mapping and the new one. |
| vvs4 |
Posted - Oct 13 2010 : 2:47:15 PM
Hi Chris,
I read up on the devices on the BIAC wiki, saw that it was like a USB keyboard, and was able to get it working with e-prime almost immediately - woohoo! Many thanks for your quick response, and help from Francis as well.
Best,
Vanessa |
| petty |
Posted - Oct 13 2010 : 07:37:51 AM
Our 8-button box shows up as a keyboard device ... so you should give that a shot. |
|
|
